TRUST Verdi studs, 3/8", 16 mm
Taxes included.
Shipping costs calculated at checkout.
Verdi studs with a 16 mm base.
The Verdi is a faceted pyramidal point: it penetrates the ground instead of bearing on top of it.
✨ Key features
- ✔ Magnetic stainless steel: it does not rust and can be picked up with the magnetic tray
- ✔ Universal 3/8" thread, compatible with almost all horseshoes
- ✔ Integrated cleaning groove that pushes out dirt when screwing in
- ✔ Faceted pyramidal point
- ✔ 16 mm base
- ✔ Four heights, from 15 to 30 mm
📋 Technical specifications
- Type: studs
- Base: 16 mm
- Heights: 15 mm / 20 mm / 25 mm / 30 mm
- Material: stainless steel
- Thread: 3/8"
🐎 Why choose this product?
A point grips where a flat head slips: this is the profile for hard, smooth ground.
🧴 Instructions for use
⚠️ Choose based on the ground, not on habit: on hard, dry ground, use a thinner stud; on wet or deep ground, use a thicker stud. The outer studs must be the same length as the inner ones, or no more than 0.5 cm longer — beyond that, the foot lands unevenly. Clean the hole with a thread pick and run the tap through it again before screwing in the stud: a dirty thread damages both the stud and the horseshoe. Remove the studs as soon as the event is over; never transport or stable the horse with them in.
