Skip and go to content

Equilibrium Heatsense Massage Pad User Manual

User manual — Equilibrium Heatsense Massage Pad

This manual covers the Equilibrium Heatsense heated massage pad (Heatsense Massage Pad), as well as its lithium-ion battery and international charger. Most horses accept the Heatsense immediately, but the first introduction should be carried out carefully to ensure a positive experience.

Preparing the pad

  1. The battery contains some charge when received. It is recommended to fully charge it before first use: a full charge can take up to 12 hours (see Battery and charger).
  2. When you are ready, connect the battery to the Heatsense using the cable located in the pocket on the right side of the pad.
A fully charged battery provides at least 10 sessions of heat and massage in normal weather, but this may decrease to 8 sessions in cold weather. Massage sessions remain possible after this, but it is recommended to recharge the battery after 8 to 10 sessions to make full use of the heat function.

Introducing the pad to your horse

During the first introduction, it is best for someone to hold and reassure your horse.

  1. Fold the straps over the pad so they do not get in the way.
  2. Gently slide the pad onto the horse and position it so that it follows the contours of its back.
  3. Adjust the length of the straps, but do not fasten them yet.
  4. Turn on the heat and/or massage by pressing the corresponding button on the control panel. To turn it off, press and hold the same button again.
For your horse's first experience with the pad, it is recommended to use the heat and/or the low massage setting.

Fastening the straps

  1. Once you are sure your horse has accepted the pad, fasten the breast strap, then the belly straps.
  2. The belly straps cross over like those on a rug, and the central strap connects directly to the opposite central strap.
  3. Start with the straps tightened so that they lie flat against the horse’s sides and the pad is stable on its back.
  4. As the horse relaxes during the massage, it may breathe more deeply: readjust the straps to allow its rib cage to expand.

The massage session

Each session lasts 30 minutes, after which the pad switches off automatically. If you do not have 30 minutes, switch it off manually by pressing and holding the button for the selected massage intensity until the Heatsense stops: a shorter session is still beneficial for the horse.

The heat option

Ideal for sensitive horses, horses returning to work, or to help warm up the muscles before exercise.

The Heatsense is designed to reach and maintain a therapeutic temperature of 42 °C for 15 minutes. For safety, and to prevent the muscles from overheating, sensors independently adjust the heating power on the left and right sides of the pad according to the horse’s temperature. Once the desired temperature has been reached, the Heatsense therefore switches off the heat until the horse’s temperature needs to be raised again.

When to use massage and heat

  • For horses resting in their boxes, to maintain good blood circulation.
  • After exercise, to aid recovery.
  • Before exercise, as part of the warm-up.
  • At competitions, to relax after travelling.
  • On the horse’s rest days, as part of a maintenance programme.
  • At any time, as a reward.

Care and storage

  • When you are not using it, always disconnect the battery from the Heatsense to preserve its charge.
  • The fabric is not washable, but it can be wiped to remove grease or marks: use a soft cloth dampened with lukewarm water. Do not use detergent.
  • Store the Heatsense in a dry, temperate place. Make sure it is dry before storing it between uses.
  • In cold weather, the battery may discharge faster when you use the heat function: plan for more frequent recharging during the winter months.

Battery and charger

Item Reference Specifications
Equilibrium® Heatsense lithium-ion battery EPLBATTHS 7.2 V – 10000 mAh – 72.0 Wh. For use only with the Equilibrium® Heatsense massage mat.
Heatsense international charger CH0251-0843000F Input 100-240 V ~ 50-60 Hz, 0.8 A max.; output 8.4 V DC / 3.0 A. Lithium-ion battery charger supplied with EU, UK, US and AUS plugs.

The battery and charger are sold separately. The EPLBATTHS battery must be charged only with the CH0251-0843000F charger.

Changing the mains plug

The charger is supplied with 4 interchangeable plug adapters, which are fitted by turning them until they click into place. A release button on the side makes it easy to change the adapter according to the country.

  1. Attach the adapter suitable for your country: it must lie flat against the charger, and you should hear a “click”.
  2. Only then connect the charger to the mains.

Charging the battery

  • A full charge can take up to 12 hours.
  • The charger light is red while charging and turns green when the battery is fully charged.
  • Lithium-ion batteries last longer when charged regularly: avoid completely draining the battery.

Runtime

Conditions Minimum runtime of a fully charged battery
Normal temperature 10 30-minute sessions, high massage + heat
Cold weather 8 30-minute sessions, high massage + heat

Heat consumes more energy than massage. When the battery no longer has enough power to heat, you can generally still use the massage function for a while. The battery must then be recharged before you can use the heat function again.

Battery and charger safety instructions

A question about your Heatsense, its battery or its charger? Contact us.

Manufacturer: Equilibrium Products (United Kingdom). French translation of the instructions and safety guidelines published by the manufacturer.

Back to top