Artemis 2-in-1 trail bridle in oiled leather

Bridle and halter in the same piece of tack: remove the bridle, tie up, and set off again. Without ever putting the horse’s head on the ground.

On a trail ride, the break always starts the same way: you have to remove the bridle so the horse can eat, and you need to be able to tie it up. “Artemis” eliminates the intermediate step — its 2-in-1 design switches from bridle to halter in just a few seconds, without taking anything apart or putting anything on the ground. The English noseband adjusts on both sides, and the very supple crownpiece is shaped around the ears for extra clearance. It is all made from open-pore oiled leather: matte, rustic, resistant to mud and moisture, it does not dry out and deeply absorbs care products. Delivered without reins.

✨ Key features

• ✔ 2-in-1 design: bridle and halter in the same piece of tack
• ✔ Switches from one to the other in just a few seconds
• ✔ Robust, water-repellent open-pore oiled leather
• ✔ English noseband, adjustable on both sides
• ✔ Very well-padded crownpiece, shaped around the ears
• ✔ Matte, rustic appearance that stays relatively clean
• ✔ Delivered without reins

📋 Technical specifications

• Function: bridle convertible into a halter
• Noseband: English, adjustable on both sides
• Crownpiece: padded, shaped around the ears
• Leather: vegetable-tanned oiled leather, open pores
• Reins: not included
• Hardware: stainless steel

🐎 Why choose this product?

Oiled leather is vegetable-tanned and then nourished with oils during the tanning process: the result is supple, water-repellent leather that is relatively resistant to dirt. It is outdoor leather—the kind that ages well when used rather than stored away.

🧴 Care instructions

Oiled leather requires little care: use a damp cloth to remove mud, then apply a nourishing oil or grease two to three times a year, more often if you ride in all weather. Never dry it near a heat source—it will harden.

Composition

Leather 75%, stainless steel 20%, polyester 5%.