Component designations
- A — Cutting head
- B — On/off switch
- C — Battery compartment
- D — Guide comb*
- E — Guide comb, cutting length 3 mm
- F — Guide comb, cutting length 4.5 mm
- G — Blade guard
- H — Cutting head oil
- I — Cleaning brush
* not included with all devices.
General safety instructions
Intended use
- Use the animal clippers exclusively to cut animal hair and fur.
- The device is not intended for commercial use.
User requirements
- Before using the device for the first time, read the entire instruction manual and familiarise yourself with the device.
- This device may be used by children aged 8 or over and by persons with reduced physical, sensory or mental capabilities or a lack of experience and/or knowledge, provided that they are supervised or have been instructed in the safe use of the device and understand the associated risks. Do not allow children to play with the device. Cleaning and user maintenance must not be carried out by children unless they are supervised.
Warning! Risk of injury due to improper use.
- Never leave the device unattended.
- To prevent electrolyte leakage, do not expose the battery to high temperatures or open it. If electrolyte leaks, wipe it up with a damp cloth and dispose of the battery. In case of contact with the eyes, consult a doctor immediately!
- To avoid injury, do not use the device if the cutting head is damaged.
General advice and symbols
- In addition to these operating instructions, observe the safety instructions and all technical notices supplied separately.
- Before using the device for the first time, you must have read and fully understood the operating instructions and safety instructions.
- Consider the operating instructions and safety instructions an integral part of the product and keep them carefully in an easily accessible place.
- The operating instructions and safety instructions are available in PDF format, and the EC declaration of conformity is available in other official EU languages: contact us.
- Include the safety instructions and operating instructions with the device when handing it over to a third party.
| Label | Meaning |
|---|---|
| WARNING | Potential risk of injury or risk to health. |
| CAUTION | Risk of material damage. |
| “i” symbol | Useful tips and information. |
Technical specifications
| Motor | Battery operation (1 × AA) |
|---|---|
| Dimensions | 103 mm × 32 mm × 42 mm |
| Weight | 97 g |
| Emission sound pressure level | max. 66 dB(A) at 25 cm |
| Vibrations | < 2.5 m/s² |
Use
Caution! Risk of damage due to improper use.
- Use only accessories recommended by the manufacturer.
- Never insert or drop objects into the device openings.
- After use, switch off the device and place the blade guard over the cutting head.
- Remove used batteries from the device immediately.
- Use only leak-proof AA 1.5 V batteries.
- If the device will not be used for an extended period, remove the batteries.
- Use and store the device only in dry places.
Left, Figure 1: battery and battery compartment cover (a / b). Right, Figure 2: switch, a = on, b = off.
- Lift the battery compartment cover to access it (Fig. 1a).
- Insert the battery with the negative terminal (−) facing the cutting head (Fig. 1).
- Replace the battery compartment cover (Fig. 1b).
- Switch the device on using the on/off switch (Fig. 2a) and switch it off after use (Fig. 2b).
Cutting with the comb attachments
Depending on the model, comb attachments in different sizes are included: cutting lengths of 3 mm and 4.5 mm.
Attaching / removing the attachment comb
- Place the attachment comb on the cutting edge of the cutting head and press at the clips on the cutting head provided for this purpose.
- To remove it, spread it apart in the direction of the arrow.
Cleaning and maintenance
- Do not immerse the appliance in water.
- After each use, remove hair residues from the cutting head using the cleaning brush.
- Wipe the appliance only with a soft cloth, slightly damp if necessary. Do not use abrasives or solvents!
- For efficient, long-lasting cutting performance, it is important to oil the cutting head frequently (Fig. 4).
Disposal and used batteries
Warning! Risk of environmental damage in the event of improper disposal. Proper disposal protects the environment and prevents possible impacts on people and the environment.
When disposing of the appliance, observe the applicable legal regulations. Within the European Community, national regulations based on Directive 2012/19/EU on waste electrical and electronic equipment (WEEE) govern the disposal of electrical appliances. Under these regulations, the appliance must no longer be disposed of with municipal or household waste. It can be handed in free of charge at municipal collection centres or waste treatment companies. This product’s packaging is made of recyclable materials: please help protect the environment and take it for recycling.
Information obligation under the Battery Act
- Used batteries must not be disposed of with household waste. You can return used batteries free of charge to points of sale. As a consumer, you are legally required to return used batteries.
- Batteries containing harmful substances bear a symbol consisting of a crossed-out wheeled bin and the chemical symbol (Cd = cadmium, Hg = mercury or Pb = lead) of the heavy metal determining their classification as harmful substances.
Manufacturer: Wahl. Manufacturer’s instructions for use (form no. 91692, edition 07/2017) and general safety instructions, French version.
