Whis Wireless 2-Way User Manual

User manual — WHIS Wireless 2-Way

Wireless earpiece (Wireless Student, mode C) with microphone, allowing the rider to respond to the instructor. This quick-start guide enables you to use it right away.

Before you begin: the Wireless 2-Way only works in conjunction with WHIS Competition (Pro) devices set to A/B (A = Master, B = Student).

Controls

Wireless 2-Way earpiece controls, from top to bottom
Element	Function
Indicator (LED)	Green once connected to the Master device
+ button	Increase earpiece volume
Side button	On/Off
− button	Decrease earpiece volume
S button (SET)	Connection, microphone volume, microphone mute
Micro-USB port (bottom)	Charging

Setting the mode of the Competition devices (A, B, C)

Make sure the Competition device is turned off.
Press and hold SET and − at the same time, then turn on the device without releasing them. The display shows A, B, or C.
To set the device to A (Master) or B and C (Student), turn it off using the On/Off button and repeat the process until the desired mode is displayed.

A is the Master device (instructor): it must always be switched on.
The Wireless 2-Way is always automatically in mode C.
A Competition device can only be set to mode C if you are not using a Wireless 2-Way.

Changing the channel

Turn off the Competition device using the On/Off button.
Unlock it: switch it on while holding down SET. The device remains unlocked for 5 seconds (the padlock symbol then disappears from the display).
Select the channel with + / −.

To use two Competition devices as a group, set them to the same channel: the green indicator lights up once the connection is established.

Using the Wireless 2-Way

Connecting to Competition devices

Turn on the earpiece while holding down SET: it automatically searches for available signals. As soon as it picks up the signal from the Master device, its indicator turns green.

Earpiece volume

Press + or − to adjust the earpiece volume.

Microphone volume

Turn off the device first.
Unlock it: switch it on while holding down SET. It remains unlocked for 5 seconds.
During these 5 seconds, adjust the microphone volume using SET.

Mute the microphone

Press and hold SET: “MUTE” appears on the displays of the Competition devices, and the microphone sound is muted, so the others can no longer hear you. Press and hold SET again to reactivate the microphone.