Premiere self-cleaning blunt W3/8 studs, 10 mm, 17 mm long — the 10 mm ones
Taxes included.
Shipping costs calculated at checkout.
Blunt studs with four flat sides and no point, in a longer version than the 12 mm model.
The vertical grooves in the thread have a self-cleaning effect: they push out the dirt left in the stud hole as the stud is screwed in.
✨ Key features
- ✔ Self-cleaning effect: faster and easier screwing
- ✔ Four flat sides, no point
- ✔ Galvanized steel to protect against rust.
- ✔ Extra grip on muddy ground
- ✔ Set of 10
📋 Technical specifications
- Type: blunt self-cleaning studs
- Head width: 10 mm
- Total length: 17 mm
- Thread length: 6 mm
- Thread: W3/8
- Material: 100% galvanized steel
- Packaging: set of 10
🐎 Why choose this product?
⚠️ This model and reference 746122 share the same 10 mm width; they differ in total length: 17 mm here compared with 12 mm. The softer the ground, the more useful the extra height. W3/8 thread, the most widely used Whitworth thread on tapped horseshoes in Europe. ⚠️ It is not compatible with an M12 tapped horseshoe: check the thread pitch of your stud holes before ordering.
🧴 Instructions for use
Clean the stud hole with a tap and then a brush before screwing in the stud: forcing a stud into a dirty stud hole damages the horseshoe thread. ⚠️ Remove the studs as soon as the event is over and plug the stud holes: a horse that remains shod with studs in its stall, pasture, or trailer may injure itself when lying down or moving around.
