TRUST Vivaldi 3/8" 18 mm studs
Taxes included.
Shipping costs calculated at checkout.
Vivaldi studs with an 18 mm base and a height of 30 mm.
The Vivaldi is a narrow cylinder with a flat top, taller than it is wide. The 18 mm base widens the bearing surface without changing the profile.
✨ Key features
- ✔ Magnetic stainless steel: it does not rust and can be picked up with the magnetic tray
- ✔ Universal 3/8" thread, compatible with almost all horseshoes
- ✔ Integrated cleaning groove that pushes out dirt when screwing in
- ✔ Narrow cylinder with a flat top
- ✔ 18 mm base
📋 Technical specifications
- Type: studs
- Base: 18 mm
- Height: 30 mm
- Material: stainless steel
- Thread: 3/8"
🐎 Why choose this product?
The same profile as the 16 mm version, with a wider bearing surface: the choice when the horseshoe allows it.
🧴 Usage advice
⚠️ Choose according to the ground, not habit: on hard, dry ground, use a thinner stud; on wet or deep ground, use a thicker stud. The outer studs should be the same length as the inner ones, or no more than 0.5 cm longer—as anything beyond that causes the foot to land crooked. Clean the hole with a thread cleaner and run the tap through it again before screwing in: a dirty thread damages both the stud and the horseshoe. Remove the studs as soon as the event is over; never transport or stable the horse with them fitted.
