10 mm BR Soft Contact double-jointed bridoon bit with rings
Taxes included.
Shipping costs calculated at checkout.
This bit is made of solid Cuprigan — an alloy of 89% copper, 7% aluminum, 3% iron, and 1% zinc — mounted on stainless steel pieces. As it oxidizes, the material gives off a pleasant smell and taste. Its anatomical shape follows the contours of the mouth and distributes pressure gently and evenly.
The bridoon is used in combination with a curb bit. Its small rings leave room for the curb bit. The supplier recommends choosing it 0.5 to 1 cm wider than the curb bit.
✨ Key features
- ✔ Solid Cuprigan: its oxidation produces a taste that stimulates salivation
- ✔ Thin 10 mm mouthpiece, leaving room for the curb bit
- ✔ Small 50 mm rings
📋 Technical specifications
- Type: double-jointed bridoon
- Material: solid Cuprigan (89% copper, 7% aluminum, 3% iron, 1% zinc), stainless steel pieces
- Mouthpiece thickness: 10 mm
- Ring diameter: 50 mm
- Sizes: 12.0 cm / 13.0 cm / 14.0 cm
🐎 Why choose this product?
With a double-jointed bit, the mouthpiece consists of three parts, and the central section lies flat on the tongue. This creates more pressure on the tongue than a single-jointed bit, but eliminates the V-shaped effect toward the palate. With a bridoon, this pressure remains moderate: the 10 mm mouthpiece is thin, and most of the action comes from the curb bit. ⚠️ Pay attention to the size: the supplier recommends choosing the bridoon 0.5 to 1 cm wider than the curb bit so that the two bits can be used together without interfering with each other.
🧴 Usage advice
Rinse the bit with clean water after each use. ⚠️ Cuprigan tarnishes and turns green as it oxidizes: this is the alloy functioning normally, not a defect, and it should not be removed with an abrasive product. Measure the width from one ring to the other, with the mouthpiece straightened. ⚠️ A bit that is too narrow pinches the corners of the mouth; one that is too wide moves around in the mouth and knocks against the teeth.
