Technical data
| Material | 100% polyester |
|---|---|
| Side panels | 95% polyester, 5% elastane |
| Padding | 100% polyester |
| Lining 1 | 100% polypropylene with Welltex® technology |
| Lining 2 (pockets) | 100% polyester |
| Sizes | S to XXXL |
| Voltage | 5 V (standard USB-C) |
| Power supply | Optional power bank (not included), with an output of at least 5 V / 2.1 A |
Warnings and instructions
- Do not wear the vest directly on your skin.
- Avoid using the highest heat level for long periods: this could cause burns.
- To avoid burns, test the temperature on the back of your hand (sensitivity to heat is higher there than in the palm).
- Always disconnect the power bank when the vest is not in use. Never leave the product unattended when it is switched on.
- Always read this manual before use and make sure that the power bank has the required capacity and specifications.
- The product may be used by children over 8 years old, people with reduced physical or mental abilities, and on animals, provided that appropriate supervision or instructions have been given.
- Do not use it if you have reduced sensitivity to heat or difficulty perceiving overheating, for example in cases of diabetes, skin lesions or scars, or after consuming alcohol or pain medication.
- Product not intended for medical use.
- Do not use it when folded or rolled up.
- Do not modify it. Repairs must be carried out only by qualified personnel.
- Inspect it regularly; do not use it if it is damaged.
- Do not use it hidden between materials (for example, mattresses): it must remain visible during use.
- Do not use it if the lining is wet.
Use
- Connect the power bank: connect the vest's USB-C cable to your power bank.
- Turn on: press and hold the LED control button for 3 seconds.
- Select the level: press for 1 second to change the heat level (high / medium / low).
- Turn off: press and hold the button until the indicator turns off.
Heat levels and quick heating
| Indicator color | Level | Temperature |
|---|---|---|
| Red | Highest heat | 55 °C |
| White | Medium | 50 °C |
| Blue | Lowest heat | 45 °C |
Quick heating — press and hold to activate quick heating (maximum temperature). During these 5 minutes, you can manually select the heat level (red, white, blue). If you do not select one, the vest automatically switches to the medium level (white indicator) after 5 minutes.
After use
- Turn off the vest.
- Disconnect the power bank by holding the connector: never pull on the cable or the vest.
Cleaning
- Remove the power bank before washing.
- Place the silicone cap over the USB-C port and store it in the pocket.
- Hand wash only, at 30 °C maximum. Do not use bleach or fabric softener. Do not wring. Do not dry-clean. Do not iron.
- Air-dry. Do not tumble dry.
Storage and recycling
- Let the vest dry completely before folding it.
- Let it cool before storing it. Keep it in a cool, dry place, away from heat sources.
- Used batteries and electrical products must be recycled in accordance with Directives 2012/19/EU and 2024/884/EU.
For any questions about your heated vest, please contact us.
Manufacturer: Back on Track AB. Back on Track AB reserves the right to make changes, and some details (illustrations, typos) may not fully correspond to the product. Based on the manufacturer's product manual for heated vests.
