Premiere self-cleaning oval W3/8 studs 12 × 16 mm — pack of 10
Taxes included.
Shipping costs calculated at checkout.
Blunt studs with an oval head, two flat sides, and a highly wear-resistant steel tip.
The vertical thread grooves are self-cleaning: they push out the dirt remaining in the stud hole as the stud is screwed in.
✨ Key features
- ✔ Oval head, two flat sides
- ✔ Self-cleaning action: faster, easier screwing
- ✔ Wear-resistant steel tip
- ✔ Galvanized steel to protect against rust.
- ✔ Extra grip on soft ground
- ✔ Set of 10
📋 Technical specifications
- Type: self-cleaning studs with oval heads
- Head dimensions: 12 × 16 mm
- Overall length: 18 mm
- Thread length: 6 mm
- Thread: W3/8
- Material: 100% galvanized steel
- Packaging: set of 10
🐎 Why choose this product?
The oval head provides a longer bearing surface along the hoof's axis, offering more support on soft ground than a square head of the same width. W3/8 thread, the most widely used Whitworth thread size on tapped horseshoes in Europe. ⚠️ It is not compatible with an M12-tapped horseshoe: check the thread size of your stud holes before ordering.
🧴 How to use
Clean the stud hole with a tap and then a brush before screwing in the stud: forcing a stud into a dirty hole can damage the horseshoe's thread. ⚠️ Remove the studs as soon as the event is over and plug the stud holes: a horse that remains shod with studs in its stall, pasture, or trailer may injure itself when lying down or moving around.
