Premiere W3/8 pointed self-cleaning studs, 12 mm — pack of 10
Taxes included.
Shipping costs calculated at checkout.
Pointed studs with four flat sides and a highly wear-resistant steel tip.
The vertical grooves in the thread are self-cleaning: they clear out the dirt left in the stud hole as the stud is screwed in.
✨ Key features
- ✔ Self-cleaning effect: faster and easier screwing
- ✔ Four flat sides, wear-resistant steel tip
- ✔ Galvanized steel to protect against rust.
- ✔ Extra grip on hard ground
- ✔ Set of 10
📋 Technical specifications
- Type: self-cleaning pointed-head studs
- Head width: 12 mm
- Total length: 21 mm
- Thread length: 6 mm
- Thread: W3/8
- Material: 100% galvanized steel
- Packaging: set of 10
🐎 Why choose this product?
The self-cleaning effect is what saves time at the paddock: the stud clears the dirt from the stud hole as it is screwed in, instead of getting stuck against it. W3/8 thread, the most widely used Whitworth thread size on tapped horseshoes in Europe. ⚠️ It is not compatible with an M12 tapped horseshoe: check the thread size of your stud holes before ordering.
🧴 Instructions for use
Clean the stud hole with a tap and then a brush before screwing in the stud: forcing a stud into a dirty hole can damage the horseshoe thread. ⚠️ Remove the studs as soon as the competition ends and plug the stud holes: a horse that remains shod with studs in its stall, field, or trailer may injure itself when lying down or moving around.
