Premiere Classic W3/8 pointed studs oval head

Here is the pointed stud from the Premiere range: an oval head with two flat sides, topped with a very hard steel point. On soft ground, this point penetrates instead of slipping—this is the model to use when the ground is muddy and landing after a jump is a concern.

Galvanized steel to prevent oxidation, height 18 mm, set of 10.

✨ Key features

• ✔ Extremely hard steel point: grips soft ground and resists wear
• ✔ Oval head with two flat sides, which fits the wrench securely
• ✔ Galvanized steel: the studs will not rust in the box between competitions
• ✔ Sold in sets of 10: enough to equip all four feet and keep spare pieces

📋 Technical specifications

• Type: pointed, oval head with two flat sides
• Height: 18 mm
• Thread: W3/8, tap length 6 mm
• Wrench: 12 x 16 mm
• Material: galvanized steel
• Packaging: set of 10

🐎 Why choose this product?

The right stud is determined by the ground, not the catalogue. Pointed and tall, this one is made for soft, deep ground: it penetrates. On hard ground or sand, it would not penetrate and would transmit the impact to the hoof—choose a blunt, low-profile model instead.

🧴 Advice for use

Clean the hole with a tap before screwing in the stud, and plug it again as soon as the stud is removed. Never leave a horse wearing studs in its stall, in the field, or in the trailer: there is a real risk of injury to itself or another horse. Fit studs to both feet of the same pair in the same way.

Composition: galvanized steel.