TRUST Pavarotti studs 3/8" 18 mm
Taxes included.
Shipping costs calculated at checkout.
Pavarotti studs with an 18 mm base and a rounded tip.
The Pavarotti has a rounded, dome-shaped tip. The TRUST catalogue recommends it for grass growing on rocky or volcanic ground.
✨ Key features
- ✔ Magnetic stainless steel: it does not rust and can be picked up with the magnetic tray
- ✔ Universal 3/8" thread, compatible with almost all horseshoes
- ✔ Integrated cleaning groove that pushes out dirt while screwing in
- ✔ Rounded, dome-shaped tip
- ✔ Designed for grass on rocky or volcanic ground
- ✔ 18 mm base
- ✔ Three heights: 20, 27 and 30 mm
📋 Technical specifications
- Type: studs
- Base: 18 mm
- Heights: 20 mm / 27 mm / 30 mm
- Material: stainless steel
- Thread: 3/8"
🐎 Why choose this product?
The wide base distributes pressure over ground that does not give way: this protects the joint when the ground is hard underneath.
🧴 Usage advice
⚠️ Choose according to the ground, not habit: on hard, dry ground, use a thinner stud; on wet or deep ground, use a thicker stud. The outer studs must be the same length as the inner ones, or no more than 0.5 cm longer — beyond that, the hoof lands at an angle. Clean the hole with a stud-hole pick and run the tap through it again before screwing in: a clogged thread damages both the stud and the horseshoe. Remove the studs as soon as the event is over; never transport the horse or leave it in its stall with them fitted.
