TRUST Vivaldi 3/8" 18 mm studs
Taxes included.
Shipping costs calculated at checkout.
Vivaldi studs with an 18 mm base and a height of 30 mm.
The Vivaldi is a narrow cylinder with a flat top, taller than it is wide. The 18 mm base widens the bearing surface without changing the profile.
✨ Key features
- ✔ Magnetic stainless steel: it does not rust and can be picked up with the magnetic tray
- ✔ Universal 3/8" thread, compatible with almost all horseshoes
- ✔ Integrated cleaning groove that pushes dirt out when screwing in
- ✔ Narrow cylinder with a flat top
- ✔ 18 mm base
📋 Technical specifications
- Type: studs
- Base: 18 mm
- Height: 30 mm
- Material: stainless steel
- Thread: 3/8"
- Country of origin: China
🐎 Why choose this product?
The same profile as the 16 mm version, with a wider bearing surface: the choice when the horseshoe allows it.
🧴 Usage advice
⚠️ Choose based on the ground, not habit: for hard, dry ground, use a thinner stud; for wet or deep ground, use a thicker stud. Outer studs must be the same length as the inner ones, or no more than 0.5 cm longer — beyond that, the hoof will land unevenly. Clean the hole with a stud-hole pick and run the tap through it again before screwing in the stud: a dirty thread damages both the stud and the horseshoe. Remove the studs as soon as the event is over; never transport or stable the horse with them fitted.
